GERATEK Uppsala KS9000PA++ Bedienungsanleitung Seite 57

 The settings of the temperature of the fridge can be adjusted manually by
turning the thermostat of the temperature setting to the desired setting.
 When you set a temperature, you set an average temperature for the whole
refrigerator. Temperatures inside each area may vary from the set temperature,
depending on how much food you store and where you place them. Ambient
temperature may also affect the actual temperature inside the appliance. When
you set the temperature of the fridge, these aspects should be taken into
account.
S
ETTING OF THE TEMPERATURE OF THE FRIDGE
 The temperature of the fridge can be adjusted by using the relevant adjustable
thermostat.
 After having installed the appliance wait 4 hours before you connect it to the
mains.
THE THERMOSTAT CONTROLS THE COMPRESSOR ONLY.
You must unplug the appliance to disconnect it from the mains.
Setting
Minimum
Normal
Maximum
1. Set the thermostat to position 7.
2. Now let the empty appliance operate for 2 hours.
3. Then set the thermostat to position 4 NORMAL. You can store food in the
appliance now.
4. In case of high outdoor temperatures (e.g. hot summer days) select position
5-7 or higher to set a lower temperature.
5. If you choose a low temperature and some rime is generated at the back of
the appliance, we recommend you select a higher temperature.
6. Adept the temperature setting to the outdoor temperature.
Fig. similar: modifications are possible
WARNING!
Position
Position 1
Position 4
Position 7
57
: