STIEBEL ELTRON EM Meter Installationsanleitung Seite 36

2.0 Nm
10-25 mm
Abb. 4: Connecting conductors to the EM Meter
f For a three-phase power supply, connect live conductors L1, L2
f
and L3, and neutral conductor N, to the EM Meter as shown in
the wiring diagram.
f For a single phase power supply, connect live conductor L1 and f
the neutral conductor N to the EM Meter as shown in the wiring
diagram.
Observe the following points:
- Connection cross-section: 10 - 25 mm
- Torque for screw terminals: 2.0 Nm
36 |
2
10 mm
2
EM Meter