Connection And Commissioning - STIEBEL ELTRON EM Meter Installationsanleitung

8.

Connection and commissioning

WARNING Electrocution
Life threatening voltages are present at the live compo-
nents.
- Before installation or maintenance work, disconnect
the electrical distribution board from the power sup-
ply and secure it against unintentional reconnection.
- Ensure that the conductors to be connected to the
meter are zero volt.
- Installation and maintenance work on this device
may only be carried out by an authorised electrician.
Note
The EM Meter must be able to be switched to zero volt by
the end user by means of a freely accessible meter fuse or
an additional circuit breaker.
Note
f Attach the enclosed type plate label in a clearly visible
f
position in the distribution cabinet.
EM Meter | 33