Maintenance - Siemens sitrans LG200 Kurzanleitung

SITRANS LG200 Communications: HART
• You will need the full manual to acquire the list of applicable parameters.
• The HART Device Description (DD) may be obtained from the HART Communication
Foundation at www.hartcomm.org
• We recommend that you use SIMATIC Process Device Manager (PDM) to program your
instrument.

Maintenance

SITRANS LG200 requires no maintenance or cleaning under normal operating conditions. If
cleaning becomes necessary under severe operating conditions:
1. Note the probe material and the process medium, and select a cleaning solution that will
not react adversely with either.
2. Remove the device from service and wipe the probe clean using a cloth and suitable
cleaning solution.
Unit Repair and Excluded Liability
For detailed information, please see the inside back cover.
Page EN-10 SITRANS LG200 – QUICK START MANUAL 7ML19985XG81