Herunterladen Inhalt Inhalt Diese Seite drucken

Lightmaxx Vega Matrix Wash Bedienungsanleitung Seite 17

Led moving head
Vorschau ausblenden Andere Handbücher für Vega Matrix Wash:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Safety Instructions! Please read before connection
and operation!
RISK OF ELECTRIC SHOCK.
DO NOT OPEN!
WARNING: To prevent the risk of electrocution, do not
open the device.
Please leave all maintenance and repairs to a qualifi ed
service workshop or contact your distributor.
The lightning fl ash symbol warns the user
about non-insulated current and the risk of
electrocution.
The exclamation mark symbol warns the user
about important maintenance and operating
inst-ructions in the manual.
Intended for indoor use only.
Read the manual.
This symbol indicates the minimum distance
to illuminated objects.
Please recycle the packaging correctly to protect the
environment.
Occasionally a new product may cause undesirable
odours or even emit smoke for a short period of time.
This reaction is normal and will
disappear after a few minutes.
The device is intended exclusively for us indoors
(IP20)! Please use this device only in dry environments.
Keep the device away from rain,
moisture, direct heat and dust.
To prevent condensation from forming in the device,
please allow the device to adapt to the surrounding
temperature before operating.
Please position the device in a well ventilated area,
beyond the reach of fl ammable materials or liquids.
Do not block any ventilation openings, as it may cause
over-heating.
Please remove the power cable if the device is not
operated for extended periods of time or maintenance
is to be conducted.
This device is designed to operate in environments
with a maximum temperature of 40° Celsius.
The installation of the device is not to be conducted by
inexperienced persons and must adhere to the mechanical
and electrical safety standards of the local law.
In case of a damaged power cable, it must be replaced by
an original replacement part from the manufacturer.
Ensure that the supply voltage does not exceed the volta-
ge capacity indicated on the housing of the device.
In case of failure of the device, please contact the dis-
tri-butor and stop all operations of the device immediately.
The device must keep a minimum distance of one metre
from fl ammable materials or liquids.
WARNING: Do not look directly into the light source!
Do not operate this device in the presence of persons
suffering from epilepsy!
OVERHEAD INSTALLATION
The installation must be performed exclusively by qua-
lifi ed personnel. Incorrect installation can cause serious
injuries or da-mage. Note the load limits of the selected
installation position.
Ensure that during installation or dismantling/ maintenan-
ce there are no unauthorized persons below the device.
Manufacturer: MUSIC STORE professional GmbH,
Istanbulstraße 22-26, 51103 Köln, Germany
17

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis