Renkforce 750782 Bedienungsanleitung Seite 69

Command: Clock (U)
Command description: This command is used to set and read the clock in the trans-
ponder reader.
Caution:
The „INDEX" is always 0000.
Format: <STX><ADR>LP<INDEX><CRC><EOT>
<STX><ADR>SP<INDEX><DATA><CRC><EOT>
Data format: The time and date are indicated as follows:
ssmmhhWWDDMMYY
ss Seconds (always 2 digits)
mm Minutes (always 2 digits)
hh Hours (always 2 digits)
WW Weekday (01 = Monday, 02 = Tuesday, 03 = Wednesday, 04 = Thursday,
05 = Friday, 06 = Saturday, 07 = Sunday)
DD Day (always 2 digits)
MM Month (always 2 digits)
YY Year (always 2 digits)
Example: <STX>FFLU0000ED<EOT>
<STX>FFLU05441301030105E8<EOT>
Reads the time 13:44:05 on Monday, 03.01.05.
69