Renkforce 750782 Bedienungsanleitung Seite 65

Command: Transponder (T)
Command description: Loads the transponder number from the transponder memory of
the control module or sets it. The transponder number is indicated with 10 digits (e.g.
AC3F00D1B4) as a hexadecimally encoded ASCII character sequence.
Format: <STX><ADR>LP<INDEX><CRC><EOT>
<STX><ADR>SP<INDEX><DATA><CRC><EOT>
Example: <STX>FFLT0032F1<EOT>
<STX>FFLTA16004A0D350<EOT>
Reads the transponder number A16004A0D3 from the memory digit 0032h, i.e. the 50th
digit.
Command: Time window for authorisation (Z)
Command description: This command configures the control module for the times at
which a transponder is authorised. The week days and 4 time windows per transponder
can be specified. The data are 5 bytes (10 ASCII characters) long.
Format: <STX><ADR>LP<INDEX><CRC><EOT>
<STX><ADR>SP<INDEX><DATA><CRC><EOT>
Data format: [Week days] [MIN(from)] [STD(from)] [MIN(to)] [STD(to)]
1. Byte: Week days (bit 0 always value 0)
Bit 7 Bit 6
Su Sa
2. Byte: Minutes (from) BCD encoded
Bit 7 Bit 6
Tens
Bit 5 Bit 4
Fr Th
Bit 5 Bit 4
Bit 3 Bit 2
We Tu
Bit 3 Bit 2
Ones
Bit 1 Bit 0
Mo 0
Bit 1 Bit 0
65