Blending; Safety Appliances; Overheating Protection; Overfilling And Overflow Sensor - Silvercrest COOK ’N‘ MIX SMK 1000 A1 Bedienungsanleitung

Blending

If you want to blend soups or shakes for a short
time, you can the BLEND function
1) Add the food to be blended into the blender
jug if it is not already in there. Ensure that
the blender jug
1300 ml marking, but not higher than the MAX
- 1600 ml marking.
2) Place the lid on the blender jug
that the contact plug
rectly into the safety socket
3) Insert the connector
on the appliance.
4) Insert the plug into a mains power socket. You
will hear a beep and the programme indicators
will flash.
5) Press the MODE button
BLEND programme indicator
flash.
6) Press and hold the START/STOP button
as long as the contents of the blender jug is to
be blended, but not longer than 20 seconds.
As soon as you let go of the START/STOP
button , the blending process stops. The
blending process stops automatically after 20
seconds.
SMK 1000 A1
.
is filled to at least the MIN -
. Ensure
in the lid fits cor-
.
into the built-in plug
repeatedly until the
starts to

Safety appliances

Overheating protection

This appliance is fitted with overheating protection
to protect the motor from overheating.
If the overheating protection is triggered, the motor
stops and the appliance switches itself off. It cannot
be switched back on until it has cooled down.
This can happen if:
–
You have used the BLEND function
eral times in quick succession for a total of
more than 20 seconds.
–
Several cooking processes have been start-
ed in direct succession without allowing the
appliance to cool down.
■ If the overheating protection is triggered and the
appliance stops, pull the plug out of the socket
and wait around 5 minute until the appliance
stops. After it has cooled down, you can use the
appliance again.
for
Overfilling and overflow sensor
This appliance is fitted with a sensor
nises when the apparatus is overfilled or threatens
to overflow.
If the appliance is overfilled, the appliance will not
start and you will hear a beep. In this case, reduce
the amount of liquid. Always pay attention to the
MAX - 1600 ml and MIN - 1300 ml markings on
the blender jug!
If the appliance threatens to overflow during a
cooking or blending process, the appliance will
switch off and starts to beep. Reduce the amount
of liquid and restart the appliance.
sev-
that recog-
GB │ IE │
23 ■