Telefunken RD1004 Gebrauchsanweisung Seite 17

5.2 Selecting DAB or FM mode
When the appliance is switched on it goes automatically to the DAB (Digital Audio Broadcasting)
„
mode. Press the SOURCE (8) button once to switch to the FM radio mode. The current selection is
shown on the display (7). To return to the DAB mode press 3 time the SOURCE (8) button.
When you switch on the radio again, it will tune automatically to the last selected radio station.
„
5.3 DAB settings menu
When in DAB mode, choose the available options for DAB mode inside the settings menu. To
„
enter the settings menu, press the MENU (4) button. Scroll through the available options by
turning the TUNE/SELECT (12) control. Confirm your choice by pressing the TUNE/SELECT (12)
control.
Menu option
Full scan
Manual tune
DRC
Prune
System
Submenu of System:
Menu option
Set sleep time
Alarm 1
Alarm 2
Time
Backlight
Language
Factory Reset
SW version
5.4 FM settings menu
When in FM mode, choose the available options for FM mode inside the settings menu. To enter
„
the settings menu, press the MENU (4) button. Scroll through the available options by turning the
TUNE/SELECT (12) control. Confirm your choice by pressing the TUNE/SELECT (12) control.
Menu option
Scan setting
Audio setting
System
Function
Re-scan the entire DAB band and refresh the station list.
Manual tuning enables you to search the band manually, to check if any have
usable signal strength.
Decreases the dynamic range of the audio signal. This adjusts the dynamic
range of the audio signal to a loud listening environment.
Note: Not available at some DAB + stations.
Available Options:
DRC Off: No compression. This is the default setting.
DRC Low: Medium compression
DRC High: Maximum compression
Remove all unavailable station from the list.
Options: Yes or No
System setup
Function
Turns off the radio automatically after 15, 30, 45, 60 and 90 minutes using the
sleep timer.
Setting of Alarm 1
Setting of Alarm 2
Clock adjustment, Date format, Clock 12/24 hours format, auto time adjustment
and Date adjustment
LCD Display brightness: "Display backlight timeout" and "On level"
Setting of the OSD language. There are 4 languages available: English,
Français, Deutsch,Italiano.
This option resets all settings to their original factory defaults. All time and
station settings will be deleted. After the system reset, automatically a new
station scanning in the DAB band will be started when the appliance is switched
on again for the first time.
Displays the version number of the control software currently installed in your
radio.
Function
All stations / Strong stations
Stereo allowed / Forced mono
System setup
17
GB