Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
B2. Installing the second part of metal bracket to cars, then assembling the two parts of metal
bracket as below:
After chosing camera model A or B please go ahead with the following installation steps:
1. Choose a routing path for the camera's power cable through the vehicle's body to the
reverse light circuit. If in doubt, seek professional installation assistance.
2. Some vehicles may have a hole available to pass the wire through, such as where the
license plate light is mounted, or you can drill a hole close to where the power cable
is attached to the camera. Once you have chosen where the cable will enter the
vehicle's body, remove the camera. If you are able to use an existing opening, skip
Heruntergeladen von
manualslib.de
Handbücher-Suchmachiene
5
Werbung
Inhaltsverzeichnis
