Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.8.
Other operation.
4.8.1. Press"Up" Key to enter Auto display when there is no OSO.
4.8.2. Press "DOWN" to select CAM1/CAM2/CAM1&CAM2 when there is no OSO.
5. Camera transmitter operation :
5.1.
The camera transmitter is installed in the rear side of the car when it is used for backing,
please connect to power supply of taillights; if it is installed in the car for door monitoring,
it can be connected to power supply of interior lights, or other 8V‐30V DC power supply
systems. When it is connected to power cord in parallel, be cautious that red wire is +,
and black wire is ‐. Prevent from short circuit and take insulation measures, for electrical
short circuit may result in fire or other serious consequences. Camera transmitter features
anti‐reversing connection, and the device won' t be damaged in the event of reverse
connection.
5.2.
When it is used for the first time, be sure to pair with the receiver. Select CAM1 or CAM2
channel for the receiver, press Confirm key to enter pairing mode， and then press PAIR
key within 30S, wait for pairing to be completed， ensure that wireless signal isn' t
interfered with in the pairing process, and icon of PAIRED will be displayed on the
receiver after pairing is successful.
If the pairing isn' t completed in time, it will return to the previous state. For an installed
device, the pairing requires two persons for operation.
5.3.
One camera transmitter can only be paired with one channel. The receiver has two
channels, which can be paired with one camera transmitter separately or with two
camera transmitters simultaneously to form dual channel and meet different monitoring
requirements.
5.4.
The paired camera transmitter can trigger the receiver to work automatically after power
is on, display the screen, and delay of the screen is less than 1 second.
5.5.
The camera transmitter has function of infrared night view. If it is too dark at night, the
infrared LED is automatically turned on to supplement light.
Caution: The LED light will emit faint red light when it is turned on. Do not stare at the light for
a long time. Otherwise. Your eyes may be iniured.
6. Installation of the product
6.1.
The holder is mounted in the receiving host.
6.2.
The receiver and holder assembly are installed on the car console or windshield.
Heruntergeladen von
manualslib.de
Handbücher-Suchmachiene
14
Werbung
Inhaltsverzeichnis
