Thrustmaster Ferrari GT Experience Benutzerhandbuch Seite 3

8 Pedal cable
9 RJ45 connector for pedal set
10 Table clamp
INSTALLING THE WHEEL
Fixing the wheel in place
1. Place the wheel on a table or other flat surface.
2. Place the clamp screw (11) in the table clamp (10) and then screw the clamping unit into the hole on
the underside of the wheel until firmly fixed in place. Do not turn the screw too tightly, as you risk
damaging the clamping unit and/or the table.
Connecting the pedal set
1. Connect the pedal cable (8) to the wheel's RJ45 connector (9).
For safety reasons, never use the pedal set with bare feet or while wearing only socks on your
THRUSTMASTER DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF INJURY RESULTING
®
FROM USE OF THE PEDAL SET WITHOUT SHOES.
11 Clamp screw
12 USB connector (for PlayStation®3)
13 Pedal set
feet.
2/8