Installation; Installing The Device - STIEBEL ELTRON BHE 50 Plus Bedienung Und Installation

Where to install your device?
-
This equipment was designed to be installed in a residence. Please ask
your distributor before using it for any other purpose.
-
The device should be installed according to normal trade practice and
incompliance with legislation in the relevant country (NFC 15-100 for
-
The equipment is class 2 and is protected against splashed water IP 24.
The device can be installed in volume 2 of a bathroom It's forbidden
to install the device in the volume 1. The device is to be installed so
that switches and other controls cannot be touched by a person in
the bath or shower. the bath or shower the bath or shower
Do not install the device :
-
example, under a central mechanical ventilation
-
other combustible materials.
distances from obstacles.
Do not install shelf above the device.
The bottom case must be at least 5 bottom case must be at least 5
mm from the wall.
In order to avoid a hazard for very order to avoid a hazard for very
young children, this device should be
installed so that the lowest heated rail installed so that the lowest heated rail

Installation

INSTALLING THE DEVICE

Volume 1
Volume 2
45
.
No electrical device
Electrical device IPX4 .
(Standard EN 60335-2-
> 250 mm
.
EN
> 150 mm
> 250 mm
> 200 mm