Electronic Equipment; Dip-Switch Setting - o&o ARX.246 Installations Und Bedienungs

FUSE GROUP
F1 TRS 250mA - T
F2 SLR 250mA - F
F3 ENG 6,3A - F
F4 LGT 1A - F
F5 12V 500mA - F
F6 24V 1A - T
REMOVABLE
TERMINALS
DIP
1 2 3 OPERATION
OFF OFF OFF AUTOTEST
OFF ON MANUAL
ON OFF SEMI-AUTOMATIC
ON ON AUTOMATIC
3 PRESS AND RELEASE CLOSURE
OFF DEACTIVATED
ON ACTIVATED
4 5 PHOTOCELL
OFF OFF IF ENGAGED DURING CLOSURE, stops movement and waits
for commands when disengaged again
OFF ON IF ENGAGED DURING CLOSURE, stops then re-closes
after 1.0 sec. once disengaged
ON OFF IF ENGAGED DURING CLOSURE, re-opens then re-closes
after 1.0 sec. once disengaged
ON ON IF ENGAGED DURING CLOSURE, re-opens then re-closes
aftrer 5.0 sec. once disengaged
6 AUXILIARY CIRCUIT BREAKER
OFF Interrupted photocell: contact has short circuited
ON Reverser intervention:contact short-circuited for 500 msec.
7 8 REVERSER
OFF OFF DEACTIVATED
OFF ON DURING CLOSURE, stops then waits for commands
ON OFF DURING CLOSURE, stops, re-opens, then waits forcommands
ON ON DURING CLOSURE, stops then re-closes gate after 5.0 sec.
9 BARRIER LIGHTS
OFF Flashing during movement
ON Flashing during movement, lit with barrier closed
10 EXTERNAL RESET
OFF Deactivated
ON Activated

ELECTRONIC EQUIPMENT

7.
TRANSFORMER
STATIC RELAY
BANK
8. DIP-SWITCH SETTINGS
FUNCTION
RESET BUTTON
STATUS LED
After changing dip-switch settings, press the
RESET button to enter and store the new
PROGRAMS AND FUNCTIONS
LINE LED
STATUS LEDS
CONTROL LEDS
- 12 -
PAUSE TIMER
MICROPROCESSOR
PROGRAMMING
DIP- SWITCH
RADIO
CONNECTOR
CONTROL
LEDS
START BUTTON
IMPORTANT
confi guration.
PAUSE ( 0-60'')
TIMER
PROGRAMMING
DIP-SWITCH
LGT BARRIERS LIGTHS
FWR MOTOR OPENING
LIN MOTOR ON LINE
REW MOTOR CLOSING
USR AUXILIARY CIRCUIT BREAKER
LUX PHOTOCELL
AUX AUXILIARY IMPUT
REV REVERSER
FCA OPENING TRAVEL STOP
FCC CLOSING TRAVEL STOP
RUN START BUTTON
OPN OPEN BUTTON
STP STOP BUTTON
CLS CLOSE BUTTON
RES RESET