Xavax 00104983 Bedienungsanleitung Seite 9

Water:
Milk:
Oil:
Sugar (Granulated sugar):
Flour
(All purpose flour – unsifted)
The display resolution of "FL OZ" & "CUPS" is 1/8. If finer resolution and higher accuracy is
required, please select mL (or gram) for the measurement and convert back to FL OZ or CUPS
if needed.
Tare (set zero) Function
It is easy and convenient to build up & mix different ingredients together all in the same cup. Af-
ter the first ingredient is added and measured, you may add another ingredient after performing
the tare function below.
- Place the cup with first ingredient on a flat table.
- Single press [0] button. The reading will reset to zero and the "TARE" icon will remain on the
upper display. Now you can add your additional ingredient. Only the weight or volume of the
last ingredient added in measured. Continue above procedure to build up different ingredients
for your recipe.
NOTE: The tare function only operate when the cup is placed on a flat surface
Reversing the Tare Function
Right after the tare function has been performed and the display is showing "0" reading with the
"TARE" icon appeared, you can press [0] button to resume the original weight or volume reading
just before the tare function and the "TARE" icon will disappear.
NOTE: The reverse tare function only operate when the cup is placed on a flat surface
IMPORTANT NOTE: It is easy and convenient to mix different ingredients in the cup. However
when mixing your ingredients, you should avoid pressing down the bottom of the base where the
sensitive weight scale components are located. Excessive force applied to the base of the cup
may permanently damage the scale inside and provide inaccurate reading.
Density
1 kg/l
1,03 kg/l
0,9 kg/l
0,84 kg/l
0,6 kg/l
units selection available
ml, CUPS, FL OZ
ml, CUPS, FL OZ
ml, CUPS, FL OZ
GRAMS, CUPS, LBS OZ
GRAMS, CUPS, LBS OZ
9