Xavax 00104983 Bedienungsanleitung Seite 7

g Operating Instructions
Thank you for purchasing the latest digital measuring cup scale. Designed and engineered with
the state-of-art technology and components, this instrument will provide reliable weight and
volume measurement of different ingredients for baking and cooking. Read this manual carefully
to fully explore the features and functions of the new product.
Name and Functions of Buttons:
Press Functions
0 (zero)
Turn on the unit
Tare or reserve tare
M (mode)
Change the display mode
U (unit)
Select display unit
The transparent cup is detachable for cleaning. Press the button below the handle to unlock and
detach the cup from the base. For normal operation, attach the cup to the base.
INITIAL SETUP AND BATTERY REPLACEMENT
Initial Setup
- Make sure the transparent cup is attached to the base
- The unit comes with a battery. For first installation, pull out the insulation sheet from the
battery door to turn on the unit.
- Right after the unit is powered on, place the empty cup scale on a flat table and it should read
0 (gram, or Cups). (Go to "calibration" section to calibrate the cup if the reading is higher
than 0)
Battery replacement:
Slide down the battery door to open. Replace 1 piece of CR2450 battery according to the polarity
indicated and close the battery door.
Power On/Off
Make sure the cup is attached to the base. Place the cup scale on a flat surface and press the
[0] button to turn on the unit.
- To ensure accurate measurement, you are suggested to check the weight of an empty cup
every time you first turn on the unit. It should read 0 gram (or oz) for your empty cup. If not,
please calibrate the cup following the instruction in the "CALIBRATION" section.
Hold 3 seconds
Turn off the unit
Hold 6 seconds
When the unit is
on, hold 6 sec to
calibrate an empty
cup
7