Before First Use; Charging; Delivery Content - Albrecht Tectalk Easy 3 Bedienungsanleitung

2. Before First Use

1. Remove the belt clip and open the battery compartment
2. Insert the 3pcs. AAA alkaline or rechargable batteries.
Position the batteries according to the polarity marking
inside the battery compartment
3. Close the battery cover again
Attention: Make sure that both radios are using the same
channel (see chapter 6.3.) otherwise a communication is not
possible.

3. Charging

The charging function must only be used if you have inserted
rechargable batteries into the radio.
Warning: Alkaline batteries must not be charged as they might
explode!
Connect a USB charging cable to the Micro-USB socket of
the device. Connect the other end to a suitable power source
like wall adapter. Please note that battery packs must be fully
charged before the first use.

4. Delivery Content

4. Tectalk Easy 3 PMR446 radios (2 pieces)
5. Belt clips (2 pieces)
6. Manual
Note: Please read the user manual carefully before using the
equipment and retain it for future consultation!
13