Before First Use; Using The Device; Turning The Device On/Off; Receiving/Transmitting Communications - Albrecht Tectalk Smile Bedienungsanleitung

3. Before first use

1. Remove the belt clip and open the battery compartment with
the supplied screwdriver
2. Insert the supplied batteries. Position the batteries according to
the polarity marking inside the battery compartment
3. Close the battery cover again and attach the screw tightly

4. Using the device

4.1. Turning the device on/off

Switch on the device: Press and hold the Power on/off button for 3
seconds.You will hear a beep sound.
To switch off the device press the button again for 3 seconds until you
hear a beep sound as confirmation.

4.2. Receiving/transmitting communications:

The devices are automatically in "Reception" mode when the devices
are turned ON.
When you press the PTT (push to talk) button, the device switches to
"Transmission" mode.
Hold the device in a vertical position with the MIC (microphone) 3 to
5cm away from your mouth. While holding the PTT button, speak into
the microphone in a normal tone of voice. Release the PTT button
when you have finished transmitting.
For others to receive your transmission, they must be on the
same channel as you.
Note: The talking range will depend on your surroundings and
environment. It will be affected by obstructions such as hills or
buildings.
15