Controls And Indicators; How To Use; Power On/Off; Transmitting And Receiving - Albrecht Multicom Bedienungsanleitung

2. Controls and Indicators

Antenna
Up/Down
Button
Mode Button
USB socket

3. How to use

3.1. Power On/Off

Press and hold the „Power" button longer than 3 seconds to turn the device on.
The unit is starting with the last selected volume level
After that press and hold the „Power" switch again for 3 seconds to turn the device off.

3.2. Transmitting and Receiving

In a master radio with ID „00", transmitting and receiving are activated automatically
as soon as its ID is set with „00".
All other units in the group can activate and deactivate transmission by holding the
"Talk" button for 2 seconds. The state is signalled by the "Talk" symbol in the upper left
corner of the display. Reception is always active as long as the radio is switched on.
Talk/State LED
Charging
LED
Power
Talk Button
LCD
Headset sockets
English 15