VKK1-4 / VKK1R-4
2.2
Tightening the mounting screws of the cover plate
Terminal box viewed from above
Tighten the mounting screws of the cover plate in the following sequence:
1.
3.
Fig. 2.3: Tightening the mounting screws of the cover plate
CAUTION
Please tighten the cover plate screws with a torque of 2.5 N@m to ensure the
specified IP degree of protection and maximum EMC protection.
A2326-1.1 en/de/fr
4.
Maximum tightening torque
of the mounting screws:
2.5 N⋅m
2.
9
HBM