HBM VKK1R-4 Montageanleitung Seite 6

6
Unauthorized conversions and modifications are prohibited
Neither the design of the device nor any technical safety aspects may be
modified without the express permission of Hottinger Baldwin Messtechnik
GmbH. Any modification excludes Hottinger Baldwin Messtechnik GmbH from
any and all liability for any damage resulting therefrom.
It is strictly forbidden to carry out any repairs and soldering work on the
motherboards or to replace any components. Repairs may only be carried out
by persons authorized thereto by Hottinger Baldwin Messtechnik GmbH.
• During installation and when connecting the cables, take action to prevent
electrostatic discharge as this may damage the connected electronics.
• When connecting additional devices, comply with the safety requirements
for electrical measurement, control, regulatory and laboratory equipment
(EN61010).
• All the interconnecting cables must be shielded cables. The screen must
be connected extensively to ground on both sides.
HBM
VKK1-4 / VKK1R-4
A2326-1.1 en/de/fr