Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. General information
1. General information
The contact pressure gauge described in the operating instructions has been designed
„
and manufactured using state-of-the-art technology. All components are subject to strin-
gent quality and environmental criteria during production. Our management systems are
certified to ISO 9001 and ISO 14001.
EN
These operating instructions contain important information on handling the instrument.
„
Working safely requires that all safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety regulations
„
for the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate
„
vicinity of the instrument and readily accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the operating instructions
„
prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by using the
„
product contrary to its intended use, non-compliance with these operating instructions,
assignment of insufficiently qualified skilled personnel or unauthorised modifications to
the instrument.
The general terms and conditions contained in the sales documentation shall apply.
„
Subject to technical modifications.
„
Further information:
„
- Internet address:
Model
PGT23.063
PGT23.1x0, PGT26.1x0 891.44
PGT43
PGT43HP
PGT63HP
APGT43
DPGT43
DPGT43HP
1) Variant of the output signal
1: 4 ... 20 mA, 2-wire, passive, per NAMUR NE 43
2: 4 ... 20 mA, 2-wire, for hazardous areas
3: 0 ... 20 mA, 3-wire
4: 0 ... 10 V, 3-wire
For instruments which are additionally fitted with switch contact(s), the following operat-
ing instructions also apply:
- "Pressure gauges with inductive contact model 831, for hazardous areas",
article number 14320154
- "Pressure gauges with switch contact model 821, 851 or 830 E",
article number 14057651
4
www.wika.de / www.wika.com
Transmitter electronics
for non-hazardous areas
Model
Variant
891.44
1, 3, 4
1, 3, 4
891.44
1, 3, 4
891.44
1, 3, 4
891.44
1, 3, 4
891.44
1, 3, 4
891.44
1, 3, 4
891.44
1, 3, 4
Pressure gauges with output signal, optionally for hazardous areas
Transmitter electronics
for hazardous areas
Model
Variant
1)
-
-
892.44
2
892.44
2
892.44
2
892.44
2
892.44
2
892.44
2
892.44
2
Data
sheet
1)
PV 12.03
PV 12.04
PV 14.03
PV 14.07
PV 16.06
PV 15.02
PV 17.05
PV 17.13
Werbung
Kapitel
Inhaltsverzeichnis
