Network Update; Common Interface; Software-Update - IKEA UPPLEVA Handbuch

Use one-touch play
One-touch play enables you to press the
play button on, for example, your DVD
remote control. This starts playback on your
DVD device and automatically switches your
TV to the correct source, displaying DVD
content.
Use system standby
System standby enables you to press the
button on, for example, your TV remote
control. This switches your TV and all
connected HDMI devices to standby mode.
Network update
Press MENU on the remote control, then
select OPTIONS > Network Update.
Select On/Off to enable or disable the
Network update function.
─ When this function is on, the TV will
automatically update channels if your
DTV service provider updates his DTV
network.
─ When this function is off, you need to
run the channel search again to get
new channels or remove unavailable
channels if your DTV service provider
adds or removes channels from their
DTV network.

Common interface

Encrypted digital TV channels can be
decoded with a common interface module
and a card provided by a digital TV service
operator.
The common interface module may enable
several digital services, depending on the
operator and services you choose (for
example, pay TV). Contact your digital TV
service operator for more information about
services and terms.
Use the common interface module
WARNING: Switch off your TV before
inserting a common interface module.
Be sure to follow the instruction
described below. Wrong insertion of a
common interface module may damage
both the module and your TV.
1. Following the directions printed on the
common interface module, gently insert
the module into the common interface
slot on the TV.
2. Push the module in as far as it will go.
3. Turn on the TV and wait for the common
interface function to be activated. This
may take several minutes.
Note: Do not remove the common interface
module from the slot. Removing the module
will deactivate the digital services.
Access common interface services
After inserting and activating the common
interface module, press
remote control and select OPTIONS >
Common Interface.
This menu option is only available if the
common interface module is correctly
inserted and activated. On-screen
applications and content are provided by
your digital TV service operator.
Software update
Press MENU on the remote control and
select OPTIONS > Software Update.
OK/
Press to enter.
─ Current Version: Checks the current
version of the software.
─ Product Name: Displays the product
name of your TV.
Serial Number(if available): Displays
─
the serial number of your TV.
─ By Network: Enables you to download
and install the latest software version
from the Internet. Make sure to set up
a wired or wireless network connection
first, then select By Network and
press OK/ to enter. Follow the
on-screen instructions to continue.
Note: Connect a USB device to your TV
before you start software update.
─ By Channel: Enables you to install the
latest version of the software if available.
Select By Channel and press
enter.
─ Use / to select Yes under Auto
Download to automatically download
the latest software if available. After
the software has been downloaded
successfully, you will be prompted to
decide if you want to install it right now.
If yes, follow the on-screen instructions
to complete your installation. You can
also select to ignore the installation
here.
• Select No under Auto Download to
decline the automatic download.
• Select Manual Download and press
OK/ to start manual scanning the
latest software. Follow the on-screen
15
MENU on the
OK/ to