IKEA UPPLEVA Handbuch Seite 15

OK/ to display the SATELLITE
TUNING menu. Configure the proper
information. Select Scan, and press
OK/
to start initial setup relating to all
satellite channels.
Note: For some models, this option may not
be available.
4. The search may take a few minutes.
During the process, you can press
to abort halfway.
5. Once the automatic search ends, press
BACK to return to the previous step or
press OK to restart your channel search.
6. After the automatic search, channels are
arranged in a preset order. You can skip
channels, modify the preset order or
rename channels.
Use your TV
Access channels
Using the digit buttons: press the
corresponding digit
channels.
Using the CH+/- or CH
scroll through the channels.
Watch connected devices
Repeatedly press SOURCE
control or OK on the TV to toggle between
TV and other input sources. To resume TV
viewing, press any
channel, while CH+/- will cycle through all
TV channels and other input sources.
Note: Not all models have an OK button on
the TV.
Volume
Volume control: use the VOL
on the TV or VOL+/- buttons on the remote
control to increase or decrease the volume.
Sound mute: press the MUTE button to
temporarily mute the sound. Press this
button again or the VOL+ button to restore
it.
Use TV menus
MENU
1. Press to display the main menu.
(Refer to Figure 3.)
2. Press / / /
item, then press OK to open the
corresponding submenu.
3. In submenus, use
options, use /
change values. Use OK to activate
a setting. Use OK/
corresponding submenu.
buttons to access the
/ buttons:
on the remote
digit button to enter the
/ buttons
to select the desired
/ to select menu
to set functions or
to open the
4. Press
menu.
5. Press
Note: Some options may not be available
for certain signal sources.
Select menu language
You can choose your preferred menu
EXIT language following the instructions below.
1. Press MENU to display the main menu.
2. Press
press OK to enter.
3. Select Language and press
enter.
4. Select Menu Language and press
/ to select your desired language to
display the menus.
5. Press
Use more of your TV
Setup your favourite channels
You can create a list of your favourite TV
channels.
1. Press CH.LIST.
2. Press the yellow button to enter
CHANNEL LIST SELECTION. Press
/
press OK to enter.
3. Press the blue button to start editing
your favourite list. Press
through the channel list and press OK to
select or deselect it.
4. Repeat this procedure to setup other
favourite channels.
5. Press CH.LIST/EXIT to exit.
Energy Saving
1. Press
select PICTURE > ECO Settings >
Energy Saving.
2. Press
saving mode to achieve the desired
power saving effect.
3. Press
Shortcut operation: Press ECO on the
remote control to select desired power
saving mode directly.
PAP function
To display the pictures from different source
inputs side by side. Note that one window
is for both analogue and digital TV inputs,
the other is for VGA, HDMI and CMP inputs.
(Note: Not available for AV-Scart on both
windows.)
BACK
to return to the previous
EXIT to close the menu.
/ / / to select SETUP, then
EXIT
to close the menu.
to select the favourite list and
MENU on the remote control and
/ to select desired power
EXIT to close the menu.
13
OK/ to
/ to scroll