IKEA UPPLEVA Handbuch Seite 16

MENU
1. Press to display the main menu.
2. Select PAP and press OK to enter.
3. Select the PAP option, and press
turn on/off PAP function.
4. Select TV Position, press
reposition the TV window.
5. Press / to toggle the focus window.
6. When the focus is on the TV window,
the digit buttons and CH+/- work in TV.
When the focus is on the other window,
CH+/- switches available external
sources.
Use subtitles
You can enable subtitles for each TV
channel. Subtitles are broadcast via Teletext
or DVB-T/DVB-C digital broadcasts. With
digital broadcasts, you have the additional
option of selecting a preferred subtitle
language.
Turn on/off subtitles
1. Press MENU on the remote control and
select OPTIONS > Subtitle.
2. Press OK/ to enter. (Refer to Figure
4.)
3. Select the Subtitle option, and press
/ to select On/Off to turn on/off
subtitles.
Enable subtitle languages on digital TV
channels
1. Press MENU on the remote control and
select OPTIONS > Subtitle > Digital
Subtitle Language.
2. Press / to select a subtitle language
as your preferred language.
3. Press / to select Digital Subtitle
Language 2nd.
/
4. Press to select a secondary subtitle
language.
5. Press EXIT to close the menu.
Shortcut operation: Press SUBT on the
remote control to directly select a subtitle
language available for the selected digital TV
programme.
Select a subtitle type on digital TV
channels
1. Press MENU on the remote control and
select OPTIONS > Subtitle > Subtitle
Type.
2. Press / to select a subtitle type. You
can select Hearing Impaired to display
the hearing impaired subtitles with your
/ to Select decoding page language in
Teletext
/ to Press
select OPTIONS > Teletext > Decoding
Page Language. Select a proper type of
language in which Teletext will display.
Digital Teletext language
For digital TV channels, your TV could zap
to a service with multiple initial Teletext
pages in different languages. This function
allows you to select an available language as
primary language, which relates to different
initial Teletext pages.
Press
select OPTIONS > Teletext > Digital
Teletext Language. Press
SPDIF type
Connect to an audio device through the
SPDIF output. Press
control and select OPTIONS > SPDIF
Type. Select a proper sound type from the
list for digital programmes.
─
─
─
Note: The options you may choose
depend on the programme you are
watching. If you select PCM and the
sound is ahead of the picture,
select SPDIF Delay from the OPTIONS
menu and press
time to synchronize the sound with the
picture.
T-Link
To search for CEC devices connected to the
HDMI sockets in your TV and enable one-
touch play and one-touch standby between
CEC devices.
Enable or disable T-Link
1. Press
2. Press
selected language.
MENU on the remote control and
MENU on the remote control and
MENU
If the current programme outputs sound
in Dolby D format, then either PCM or
Dolby D can be selected.
If the current programme does not
output sound in Dolby D format, only
PCM can be selected. Otherwise no
sound will be output.
Select Off to turn off the audio output
from the audio device connected to the
SPDIF output.
/ to adjust the delay
MENU on the remote control, then
select OPTIONS > T-Link.
/ to select On or Off.
14
/ to select.
on the remote
you can