IEM Tel-O-Graph BT Gebrauchsanweisung Seite 81

2) Press the button.
The start screen will be displayed (see fig. 6).
3) Press and hold the
seconds.
The individual menu options will be displayed.
Note
Every 3 seconds, the display will automatically
display the next menu option. The display order
is:

Infrared transmission (IR)

®
Bluetooth transmission (BT)

Active pairing (PAI A)

Passive pairing (PAI P)

Delete readings (c lr)
4) Wait until [PAI A] and the symbol are shown on
the display.
5) Press the button.

The active pairing process will begin and
[PAI A] and the symbols
shown on the blood pressure monitor
button for at least 3
7.2
1)
2)
and will be
Transferring readings via Bluetooth®
display. The data transfer device will be
added to the device list automatically.
Note
There should be only one other Bluetooth device
in the surrounding area.
Passive pairing (tablet, smartphone)
Note
Pairing requires some basic familiarity with
Bluetooth. If you are not familiar with Bluetooth,
please contact your healthcare provider.
Wait until [PAI P] and the symbol
on the display.
Press the button.

The passive pairing process will begin and
[PAI P] and the symbols
shown on the blood pressure monitor
display.
EN
are shown
and will be
29