Leister VARIMAT V2 Bedienungsanleitung Seite 19

Operating Instructions
Please read operating instructions carefully before use
and keep for future reference.
Leister VARIMAT V2
Automatic hot-air welding machine
Application
• Overlap welding of roofing membranes made of PVC, TPO, ECB, EPDM, CSPE for basic weld seams.
Can also be used in areas close to edges and on uneven surfaces.
• Overlap welding of sheets and coated fabrics
Warning
Caution
230
400
FI
(Translation of the original operating instructions)
Danger to life when opening the device as live components and connections are
exposed. Unplug the line/mains plug from the plug socket before opening the device.
Incorrect use of the hot air tool can present a fire and explosion hazard
especially near combustable materials and explosive gases.
Do not touch hot welding nozzle and welding plate as they can cause burns.
Allow the tool to cool down. Do not point the hot-air flow in direction of people
or animals.
Connect tool to a receptacle with protective earth terminal. Any interruption of
the protective earth conductor inside or outside the tool is dangerous!
Use only extension cables/cords with protective earth conductor !
Rated voltage stated on the device must correspond to line/mains voltage.
N 61000-3-11; Z = 0.115
max
authority.
Extract hot-air blower in case of power breakdown.
For personal protection, we strongly recommend the tool be connected to an
RCCB (Residual Current Circuit Breaker) before using it on construction sites.
The tool must be operated under supervision.
Heat can ignite flammable materials which are not in view.
The device machine may only be used by qualified specialists or under their super-
vision. Children are not authorized to use this device.
Protect the device from damp and wet.
Device must not be lifted at additional weight / end weight.
+ j 0.072 . If necessary, consultate supply
GB
USA
19