4.3
Covering a larger surface – combining elements
The formats of the acoustic tiles have been carefully coordinated. This means that all formats can
be combined, creating a larger tiled surface.
To create the best look, we recommend mounting several tiles with a small gap of approx. 1.3 mm
between the individual tiles (horizontal and vertical). This is the only way to guarantee the precise
alignment of each individual tile. To do this, use the enclosed plastic spacer, inserting it between
the individual tiles while mounting.
Note
`
`
Examples of possible combinations for creating a larger tiled surface
40x40
80x40
40x40
80x80 cm
60x40
40x40
80x40
40x40
120x120 cm
Fig. 4 Possible combinations for creating a larger tiled surface
5
Cleaning and care of the product
5.1
Cleaning
Please note:
`
`
`
We recommend regular cleaning to get the best out of your acoustic tiles.
Dust and small amounts of dirt can be carefully removed with a vacuum cleaner, soft brush or soft
cloth.
The fabric surface of the acoustic tiles can be cleaned with a dry or damp cloth.
To do so, use a soft microfibre cloth that has been moistened with water or alcohol-free detergent.
Sound Balance acoustic tiles
We recommend that, before mounting, you make a sketch of your intended combi-
nation of tiles, calculate the total weight and mark out the outer dimensions of the
overall surface on the mounting site.
During the mounting procedure, check the alignment of each acoustic tile with a
spirit level.
40x40
60x40
60x40
40x40
100x80 cm
60x40
40x40
80x40
60x40
Do not use detergents containing alcohol, solvents or chlorine, as these can
damage the fibres on the fabric surface.
Always test alcohol-free detergent for colour-fastness before use on a small,
inconspicuous part of the product.
Do not rub or scrub the fabric surface.
40x40
80x40
60x40
80x40
80x40
60x40
40x40
40x40
260x120 cm
60x40
80x40
60x40
40x40
180x80 cm
40x40
40x40
80x40
80x40
80x40
19