Mounting - Sigel Sound Balance Montageanleitung Und Gebrauchsanweisung

4.2

Mounting

Note
`
`
Warning
`
`
`
1
3
Fig. 3 Mounting procedure
The acoustic tiles are mounted as follows:
1. Use a spirit level to check that the acoustic tiles are mounted straight.
Use a pencil to mark dots on the wall for orientation.
2. Clean the place where the tesa
cleaning cloth.
Wipe the cloth across the surface several times in the same direction.
Allow the surface to dry completely before mounting the tiles.
3. Peel the protective film off the tesa
4. Place the tile in the required position and press the frame firmly onto the mounting site.
Ensure that you apply even pressure all around.
5. Repeat this procedure for all other acoustic tiles that you wish to mount.
Always ensure that you apply firm and even pressure to each tile that you mount.
If you wish to create a larger tiled surface, mount the individual tiles with a small gap of
approx. 1.3 mm between them. This guarantees that each individual tile is aligned straight.
To do this, use the enclosed plastic spacer, inserting it between the individual tiles while
mounting.
The acoustic tiles are now mounted.
9
18
We recommend that the product is mounted by a qualified person, such as your
company's caretaker.
Do not expose the acoustic tiles to extreme temperatures (not < 10°C or > 40°C)
just before mounting. Extreme temperatures affect the bonding of the adhesive
strips. If necessary, wait until the acoustic tiles have become acclimatised to room
temperature.
Before mounting, ensure that the chosen background has sufficient load-bearing
capacity for the total weight of the tiles.
Wear gloves while mounting the acoustic tiles to protect the fabric surface from
dirt and damage.
Ensure that the mounting site is free of dust and dirt.
1
4
adhesive strips are to be affixed with the enclosed tesa
®
2
5
adhesive strips on all 4 corners of the tile.
®
2
Sound Balance acoustic tiles
®