Safety; General Information; Risks To Children; Danger From Falling Objects - Sigel Sound Balance Montageanleitung Und Gebrauchsanweisung

2

Safety

2.1

General information

Before mounting and using the acoustic tiles, please note the following:
The acoustic tiles are designed for indoor use only.
ƒ
The acoustic tiles should only be used as described in this user guide.
ƒ
Supervise children and people with limited physical, sensory or mental abilities, or with limited
ƒ
experience and/or knowledge of this type of product when using the acoustic tiles.
Keep the acoustic tiles away from fire and other ignition sources.
ƒ
2.2

Risks to children

Keep packaging away from children.
ƒ
Plastic bags and small items are a choking hazard.
2.3

Danger from falling objects

Do not hang clothing or other items on the mounted acoustic tiles, or lean on them with your
ƒ
full weight.
They could fall down and injure somebody, or cause damage to the product itself.
Check that the acoustic tiles have been mounted correctly before using them.
ƒ
2.4 Information about the tesa
Keep the tesa
ƒ
Do not smoke while using the tesa
Avoid excessive skin contact with the tesa
ƒ
with your eyes. If you experience skin irritation after contact with the cloth, wash the affected
area thoroughly with soap and water. If the cloth has come into contact with your eyes, rinse
the affected eye carefully with water for several minutes.
If symptoms persist, consult a doctor.
Dispose of the tesa
ƒ
2.5

Where to mount the product

The acoustic tiles should only be mounted on even, load-bearing, split-resistant surfaces.
ƒ
Before mounting the tiles, the surface must be clean, dust-free and grease-free.
Check whether the chosen surface has enough load-bearing capacity for the total weight of the
tiles before mounting them.
Smooth wall surfaces such as tiles, concrete or smooth panelling systems are the best place
ƒ
to mount the acoustic tiles. Other smooth surfaces, such as glass, plastic, varnished wood and
smooth furniture surfaces are also suitable.
Before mounting the acoustic tiles on other, non-solid or non-split-resistant surfaces, check
ƒ
whether these are suitable for attaching products with adhesive strips.
Please note that the back of the tiles and the adhesive strips are visible when mounted on
ƒ
glass or other transparent surfaces.
Do not expose the acoustic tiles to extreme conditions.
ƒ
Do not expose the surface of the acoustic tiles to direct sunlight or radiator heat to avoid long-
ƒ
term discolouration of the fabric surface.
The acoustic tiles cannot be mounted on the ceiling.
ƒ
Sound Balance acoustic tiles
cleaning cloth away from fire and other ignition sources.
®
cleaning cloth.
®
cleaning cloth in the ordinary household waste.
®
cleaning cloth
®
cleaning cloth. Do not allow it to come into contact
®
15