EN
16
USE AND OPERATION
Installing and Removing the Blade
• Position the seal with the suction pad (flared part) facing downwards.
• Place the flower-shaped part beneath the bowl with the smaller part directly
beneath the bowl, holding the blade on the other side.
• Give it a quarter turn anticlockwise Important: Pull on the "flower" part to check that
the blade is properly screwed in.
Steam cooking
• Unplug the water reservoir lid.
• Fill the water reservoir using the opening as called for in the cooking guide below.
• Screw down the water reservoir so that the colored oval on the plug lines up with
the mark on top of the steamer/blender.
• Swivel the lid clockwise and lift to remove.
• Cut the food into the small cubes.
• Place the cubes into the steaming basket.