Klarstein Junior Chef Finn Handbuch Seite 20

EN
20
Warming/Reheating/Defrosting
For warming, insert water as shown in table below into the reservoir. Ensure only the
correct amount of water is in the reservoir. Use the timing guide below to warm a baby
bottle to around 38 degrees.
Tank filling Milk quantity per
100 ml
100 ml
120 ml
• Unscrew the water reservoir lid. Fill the water reservoir using the opening as called
for in the cooking guide on the next page.
• Screw down the water reservoir lid so that the colored oval on the plug lines up with
the mark on top of the steamer/blender.
• Swivel the lid clockwise and lift to remove.
• Put the feeding bottle to the steaming basket 2. Fix lid.
• If you wish to warm, reheating or defrosting big feeding bottles
• Fix the steaming basket 1 without the magic board on the base.
• Press button, the light comes on. Select warming function
start. The max warming time is 30 mins; And the default setting is 3mins; Also you
can press the "increase" and "decrease"button to choose the time you prefer.
• When warming is completed, the appliance beeps and the light goes off.
Room temperature
bottle (22°C)
150 ml 5 minutes
240 ml 7 minutes
360 ml 8 minutes
Warm-up time
Cooling
temperature (5°C)
7 minutes
8 minutes
10 minutes
, Then press to