Use And Operation - Klarstein 10028591 Anleitung

ADJUSTING THE HEIGHT OF YOUR ATTACHMENTS
Your attachments are equipped with a system for adjusting the height above the bottom of the bowl for op-
timum results.
1. Press the release button (2) lift the multifunction head and in-
sert the mixer blade, dough hook or whisk.
2. Hold it in position.
3. Lower the head of the appliance (10) with the button (2) press
until a click is heard.
4. Adjust the height by turning the shaft: adjust the accessories to
the ideal position.
5. Lift the head (10) of the appliance again, hold the Mixer blade,
Hook or whisk in position.
6. Before using for the first time, clean all parts of the accessories
with soapy water .rinse and dry.
7. Place the appliance on a flat, clean and dry surface and then
plug in your appliance.
MIXING/KNEADING/BEATING/EMULSIFYING/WHISKING
Depending on the nature of the ingredients, the bowl (7) with its cover can be used to prepare up to 2 kg of
dough.
1. Press button (2) to the release the multifunction head (10) and raise it to a vertical position.
2. Fit the bowl(7) onto the appliance by turning until it locks in position and place the weighted ingredients in it.
3. Position the cover on the head with the filling opening at the front of the appliance (see figure B).
4. Fit the desired accessory (11, 12, 13) in the power outlet ,pushing the shaft of the accessory home and turn it
a quarter turn towards you to lock it in position (see figure B).
5. Lower the multifunction head of the appliance to horizontal position and press button again (a click should
be heard ).
6. During preparation, you can add ingredients through the opening the cover.
7. To stop the appliance, turn the knob (1) back to „0".

Use and Operation

8