Characteristics Noise Values; Operating Times; Symbols Machine; Normal Intended Use - Altrad Lescha WSL PTO-SERIES Originalbetriebsanleitung

27 365054 Star grip screw M6x20
28 365207 Transport arm
29 376252 Spring pin

Characteristics noise values

DIN EN ISO 3746
Use of the machine as log saw for firewood with standard saw blade.
Noise power level (Load)
The factor of measurement uncertainty is 4 dB.
The values given are emission values and must therefore not simultaneously represent
safe workplace values too. Although there is a relationship between emission and
immersion levels, it can be reliably deduced whether additional precautionary measures
are necessary or not. Factors, which can influence the immersion level currently
existing at the workplace include the duration of the effects, the special type of the
workroom, other noise sources, etc. e.g. the number of machines and other adjacent
processes. The permissible workplace values can also vary from country to country.
This information should however enable an improved assessment of the danger and
risk to be carried out.

Operating times

Before initiating the device please observe the provisions pertaining to
corresponding laws (regional provisions) for the noise control.

Symbols machine

Carefully read opera-
tor's manual and the
safety instructions be-
fore starting the
machine and observe
the instructions when
operating.
Wear safety shoes.
Wear ear protection.
Use light-duty breathing
protection.
Always disengage the PTO shaft from the machine
before performing cleaning, maintenance or repair
work.
Direction of saw blade rotation
This product complies with European regulations
specifically applicable to it.

Normal intended use

This machine is designed for cross cutting firewood in the house and
hobby field.
Cutting of round material having a diameter smaller than 80 mm and
greater than 240 mm is not allowed as these pieces can not be held
safely.
The length of the material to be cut must not exceed 1000 mm. The
length of the material must be 200 mm as a minimum.
Only high-quality saw blades acc. to EN 847-1 up to a max. diameter
of 700 mm must be used.
12
L = 114.5 dB(A)
WA

Risidual risks

Wear protective
Even if used properly, residual risks can exist even if the relevant safety
gloves.
regulations are complied with due to the design determined by the
intended purpose.
Residual risks can be minimised if the "Safety instructions" and the
"Normal intended use" as well as the whole of the operating instructions
are observed.
Observing these instructions, and taking proper care, will reduce the risk
Wear eye
of personal injury or damage to the equipment.
protection.
Wear protective
clothing.
Risk of injuries of
fingers and hands
by the saw blade.
In addition, in spite of all the precautionary measures taken, non-obvious
residual risks can still exist.
Safe working
Woodworking machines can be dangerous if not used properly. If
electrical tools are used, the fundamental safety precautions must
be met to preclude the risks of fire, electric shock and injuries to
persons.
Before starting this device, read and keep to the following advice.
Also observe the preventive regulations of your professional
association and the safety provisions applicable in the respective
country, in order to protect yourself and others from possible injury.
Because it has no extraction device this machine must only be used
outdoors.
Only work pieces are allowed to be processed which can be safely
placed and held in the jigging device.
The use of saw blades made of HSS steel (high-alloy high speed
steel) is not permitted since this steel is hard and brittle. Risk of injury
through saw blade breakage and expulsion of saw blade pieces.
The intended usage also includes compliance with the operating,
servicing and repair conditions prescribed by the manufacturer and
following the safety instructions included in the instructions.
The relevant accident prevention regulations for the operation as well
as the other generally acknowledged occupational medicine and
safety rules must be complied with.
Any other use is deemed not to be intended use. The manufacturer is
not liable for any type of damage resulting from this: the user bears
the sole risk.
Unauthorized modifications to the saw preclude any liability of the
manufacturer for resulting damages of any kind.
The saw may only be equipped, used and serviced by persons who
are familiar with it and have been instructed on the hazards. Repair
works may only be carried out by us or by a customer service agent
nominated by us.
The machine may not be used in a potentially explosive environment
or be exposed to rain.
Metallic parts (wires etc.) have unconditionally to be removed from
the material to be cut.
Danger of injury of fingers and hands by the tool (saw blade) or work
piece, e.g. when replacing the saw blade.
Injury by catapulted workpiece parts.
Throwback of the workpiece or workpiece parts.
Breaking or catapulting of saw blade.
Impairment of hearing when working on the machine for longer
periods of time without ear protection.
Emission of harmful wood dusts. Wear therefore a protective mask.
Noise emission: Use saw blades designed for noise reduction and
keep the machine in a good condition.
Pass the safety instructions on to all persons who work with the
machine.
Keep these safety instructions in a safe place.