Axis P3365-VE Installationsanleitung Seite 19

AXIS P3365–VE Fixed Dome Network Camera
Install the Camera Unit
1.
Fan connector
2.
Camera unit
3.
Network cable
Note
• Be careful not to stretch or bend the network cable too much. This could cause damage to
the network cable.
• The Axis product can also be fitted with a metal conduit for protecting the cabling when
cables are routed along the wall.
1. Attach the network cable to the camera unit; and the cable for audio and I/O if
required. It is recommended that the network cable is twisted to a loop as shown in the
illustration above.
2. Insert the SD memory card (optional).
3. Pull aside the springs in the unit casing and click the camera unit in place.
4. Attach the fan connector to the connector in the camera unit.
1
2
3
19