Using Features; Care And Maintenance - SAGEMCOM C100 Bedienungsanleitung

4. Plug the handset cord into the handset (1), and into the telephone jack on the left side of the
unit (2).
5. Plug the telephone line cord into a modular jack (RJ11) (3) and into the LINE jack on the back
of the unit (4).
6. Place the handset to base cradle.

Using features

Making a call
1. Lift the handset and wait for a dial tone.
2. Dial the telephone number using the keypad.
Receiving a call
Lift the handset to answer the call.
Ringer volume control
Use the RINGER volume switch on the bottom of the base to adjust the volume of the ringer.
Flash button
Press the FLASH button instead of using the hook switch to activate customer calling services
such as call waiting or call transfer, which are provided by your local phone company.
Redial button
Redial the last number you called by pressing the REDIAL button after you get a dial tone. Max
digit of redial is 32.

Care and Maintenance

Use a slightly damp cloth to wipe the base and handset, do not use a dry cloth as this may cause
electrostatic charges.
Environment
Preservation of the environment is an essential concern of Sagemcom. The desire of Sagemcom
is to operate systems observing the environment and consequently it has decided to integrate
environmental performances in the life cycle of its products, from manufacturing to
commissioning, use and elimination.
Packaging
The presence of the logo (green dot) means that a contribution is paid to an approved
national organisation to improve packaging recovery and recycling infrastructures.
To facilitate recycling, please respect the sorting rules set up locally for this kind of
waste.
3
4
2
2
1