Accessories; Technical Data - Truma DuoControl Gebrauchsanweisung, Einbauanweisung

Accessories

High pressure hoses
see page 51
1.5 meter connection hose
for the connection of external gas cylinders
– connection G.5 for Germany –
(part no. 50020-61300)
Replacement gaskets
for high-pressure connection, M20 x 1.5 (G.13);
(part no. 50020-76300)
Remote display (including EisEx)
Shows the removal status from inside the vehicle
(part no. 50210-01)
EisEx regulator heating
(part no. 53101-01)
Angle union 90°
(part no. 50020-56000)
Extension kit
required when gas cylinders separated by more than 100 cm
(part no. 50020-61100)
Gas remote switch
For turning off the gas supply from inside the vehicle
GS 8 (part no. 57013-01)
GS 10 (part no. 57023-01)
Screw aid
(part no. 50020-61500)

Technical data

measured measured according to EN 13786
or under Truma test conditions
Gas type
Liquid gas (propane/butane)
Inlet pressure
0.6 – 16 bar
Outlet pressure
30 mbar or 50 mbar, according to variant
Flow rate
1.5 kg/h
Regulator inlet
Male thread M20 x 1.5 (G.13)
Regulator outlet
8 mm or 10 mm olive screw connection
Recommended tightening torque
3 – 5 Nm for nut M20 x 1.5 (G.13)
Declaration of conformity:
The Truma DuoControl automatic changeover regulator com-
plies with pressure device guideline 97/23/EC, with EN 13786
Appendix B.
Product Identification Number: CE-0085BQ0102.
The DuoControl automatic changeover regulator and its elec-
trical accessories components comply with the automotive
EMC directive 72/245/EEC supplemented by 2004/104/EC,
2005/83/EC and 2006/28/EC, and bears the type approval
number: e1 03 4352.
The right to effect technical modifications is reserved!
15