Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Fitti ng the car seat for 15-36 kg without Isofi x
1. Place the child safety seat on the vehicle's seat.
2. Place the child in the child safety seat and fasten it into buckle.
Fasten the seat belt, make sure that
a) the diagonal secti ons of the seat belt webbing goes over the armrest.
b) the lap secti on of the seat belt webbing goes under the armrest.
c) the diagonal secti on goes through the red belt guide on the side of the headrest.
3. Make sure that the seat belt has not become twisted. Also check that the cover is not impeding
the movement or fi t of the seat belt webbing in any way. Ensure lap secti on of belt is worn low
down, so that pelvis is fi rmly engaged.
Care and maintenance
1. Removing the cover
Backrest cover removal: First, release the elasti c strap at the bott om of the backrest cover, then
slide the cover off .
Headrest and booster seat cover removal: Slide the cover off .
2. Cleaning the seat cover:
All the material parts can be removed. Slight stains can be removed using a damp sponge soaked in
soapy water or it can be washed by hand at 30° in soapy water. Do not use bleach, do not iron, do
not machine wash, and do not tumble dry.
3.Cleaning the seat:
The harness and plasti c parts can be sponged with very mild detergent and warm water. Do not use
chemical cleansers, bleach or corrosives on any part of the seat.
Werbung
