Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Fitti ng the car seat for 15-36 kg with Isofi x
1. Rotate out the Isofi x connectors unti l you hear "Click". Check that the Isofi x connector is moving
within the angle of 15°, and cannot turn around.
2. Pull aft erwards the black plasti c coat of Isofi x connectors unti l red appears in the window.
3. Put the red plasti c protectors on the correct positi on on the car, in order that the Isofi x connec-
tors can get into these protectors.
4. Place the child safety seat on the vehicle's seat. Push the Isofi x connectors towards the fi xed
points unti l green appears in the window.
5. Place the child in the child safety seat and fasten it into buckle.
Fasten the seat belt, make sure that
a) the diagonal secti ons of the seat belt webbing goes over the armrest.
b) the lap secti on of the seat belt webbing goes under the armrest.
c) the diagonal secti on goes through the red belt guide on the side of the headrest.
6. Make sure that the seat belt has not become twisted. Also check that the cover is not impeding
the movement or fi t of the seat belt webbing in any way. Ensure lap secti on of belt is worn low
down, so that pelvis is fi rmly engaged.
Werbung
