Herunterladen Inhalt Inhalt Diese Seite drucken

Storing; Repair Service; Waste Disposal And Environmental Protection; Spare Parts - Okay RT 300 DA Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

12. Storing

• Clean the unit thoroughly, especially the cooling air
slots on the motor housing.
• Do not use water to clean the device.
• Store trimmer indoors in a dry, high or locked place
and keep out of reach of children.

13. Repair service

Repairs to electric power tools should only be carried out
by specialist electrical personnel.
14. Waste disposal and environmental pro-
tection
Dispose of the machine properly after it is worn out. Dis-
connect the mains cable in order to prevent misuse. Do
not dispose of the machine with the household waste. In
the interest of environmental protection, take it to a col-
lection point for electric machines. Your responsible local
authority can provide you with addresses and operating
times. Also take the packaging materials and worn out
accessories to the appropriate collection points.
Only for EU countries
Do not discard electric tools in the house-
hold waste!
In accordance with European Directive 2012/19/EC on
waste electrical and electronic equipment and its im-
plementation in national law, waste electric tools must
be collected separately for environmentally-compatible
re-use.
Recycling alternative to the return invitation:
Instead of returning the electric equipment, the owner is
alternatively obligated to take part in the proper recycling
in the case of relinquishment of ownership. The waste
equipment can also be taken to a collection facility which
disposes of it in the sense of the national recycling man-
agement and waste acts. This does not pertain to the
accessory parts and auxiliary equipment without electri-
cal components accompanying the waste equipment.

15. Spare parts

Please contact our service department if you need ac-
cessories or spare parts.
When working with this machine, do not use spare parts
other than those recommended by us. Using spare parts
not recommend by us can result in serious injuries to per-
sons or damage to the machine.
The following information should be provided when
ordering spare parts:
• Type of machine
• Item number of the machine

16. Warranty

For this electric tool, the company provides the end user -
independently from the retailer's obligations resulting from
the purchasing contract - with the following warranties:
GB | Operating Instructions
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by the
original purchasing document. For commercial use and
use for rent, the warranty period is reduced to 12 months.
Wearing parts, rechargeable batteries and defects caused
by the use of non fitting accessories, repair with parts that
are not original parts of the manufacturer, use of force,
strokes and breaking as well as mischievous overloading
of the motor are excluded from this warranty. Warranty
replacement does only include defective parts, not com-
plete devices. Warranty repair shall exclusively be carried
out by authorized service partners or by the company's
customer service. In the case of any intervention of not
authorized personnel, the warranty will be held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.

17. EC Declaration of Conformity

We, Ikra GmbH, Schlesierstraße 36, D-64839 Münster
- Germany, declare under our sole responsibility that the
product Grass Trimmer RT 300 DA, to which this decla-
ration relates correspond to the relevant basic safety and
health requirements of Directives 2006/42/EC (Machin-
ery Directive), 2014/30/EU (EMC-Guideline), 2011/65/
EU (RoHS-Guideline) and 2000/14/EC+2005/88/EC
(noise directive) incl. modifications. For the relevant
implementation of the safety and health requirements
mentioned in the Directives, the following standards and/
or technical specification(s) have been respected:
EN 60335-1:2012/A11:2014; EN 50636-2-91:2014
EN 62233:2008; EN 50581:2012
AfPS GS 2014:01 PAK
EN 55014-1:2006/A2:2011; EN 55014-2:2015
EN 61000-3-2:2014; EN 61000-3-3:2013
measured acoustic capacity level *
guaranteed acoustic capacity level *
* Competent institution: 0036 TÜV Süd
Conformity assessment method to annexe VI / Directive
2000/14/EC
The year of manufacture is printed on the nameplate and can be
additionally retrieved via the consecutive serial number
Münster, 11.10.2017
Matthias Fiedler, Senior Product Manager Ikra GmbH
Maintenance of technical documentation:
Ikra GmbH, Schlesierstrasse 36, 64839 Münster, Germany
GB-7
93,8 dB(A)
96,0 dB(A)

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis