SOEKS 01M Prime Bedienungsanleitung Seite 8

1. Saved data type
2. Storage time and date
3. Return to main menu
SETTINGS mode
SETTINGS mode allows to set up following device settings:
1. Date.
2. Time.
3. Units.
4. Level.
5. Dose level.
6. Volume.
7. Sensor sound.
8. Key sound.
Move through the menu by using UP and DOWN arrows.
To select an item, use SELECT button.
Technical support
Battery replacement
In case battery is discharged, battery charge status indicator in upper right
display corner signalizes about that. It is necessary to replace the battery.
On the back of the device there is a battery case. To replace battery, open the
battery cover, remove or establish batteries and close the battery cover (pic. 18).
pic. 18
14
In case you use accumulator instead, you can recharge it with the help of mini
usb connector. Therefore, connect the usb cable to device connector on the
device side. In addition, power adapter can be used as power source (pic. 19).
ATTENTION! Never connect the device to a charger or USB
connector if it has batteries installed. This can overheat the
power elements or lead to the explosion of the device.
The surface of the device must be regularly cleaned by dry gauze or felt duster.
Period of service is 8 years from the selling date.
The device in the original package must be kept in heated warehouse with the
air temperature from +5 to +40 С and maximum relative humidity 80% at the 25
grades temperature. (storage requirement 1 as per GOST Standard 15150-69).
There must be no conductible dust, acid fumes, alkalis or other corrosive
environment in the warehouse.
Maximum period of storage of the device in the warehouse since the
production – 12 month. In transport packing in unheated warehouse the device
can be kept not more than 3 months. When keeping the device more than 3
months, the device should be unpacked.
soeks.ru soeks.ru
Accumulator charging
pic. 19
Cleaning the device and implements
Period of service, storage and disposal
Period of service
Period of storage
15