SOEKS 01M Prime Bedienungsanleitung Seite 3

Battery charging current, max, mA
Power supply or USB current, max, mA
Charger output voltage, V
Display
Operating temperatures range, °С
The device
Main parts of the device construction
are presented on the pic.1.
1. Display is designed to show
measurement results and
service information.
2. Left button – cursor movement
down.
3. Right button – cursor
movement up.
4. Middle button – switching the
device on/ off, confirmation of
selection.
5. Mini USB jack - for charging
device
Product marking
On device battery tag you can find
identification tag with following information:
1. Manufacturer's trademark.
2. EU certificate of Conformity.
3. Product serial number.
4
ending table 1
300
500
from 4,5 to 5,5
Colored TFT,
128x160
from -20 to +60
pic. 1
soeks.ru
Before using the device, read the precautions below very attentively and follow
them when using the device. Violating safety standards can lead to disorders or
total breakdown of the device. The manufacturer's warranty is invalid when the
reason of breakdown is violation of following precautions.
1. The device is not waterproof. It cannot be put in liquid or be used in
terms of high humidity.
2. Preserve the device from smashes and other physical impact that can
lead to damages.
3. Do not leave the device for extended lengths of time in places, which
are intense sunlight or high temperatures exposed, while this can lead
to electrolyte leakage from battery and breakdown of the device.
4. Do not leave the device for extended lengths of time near the devices
that generate strong magnetic field, for instance, near magnets or
electric motors. Furthermore, in places where strong electromagnetic
signals are generated. For example, near radio transmissions.
5. Do not proceed measurements in proximity to mobile phones
and microwave ovens, since this may lead to distortion of device
measurements.
6. Do not try to disaggregate device or to fix it yourself.
7. Do not connect the device to computer or rose knot with the help of
USB connector in case if, instead of accumulator, batteries are set up.
This may lead to battery fire outbreak or explosion.
8. When setting up batteries, be aware of battery polarity. Otherwise,
the device can break down.
soeks.ru
Usage preparations
Precautions
5