Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SETTINGS
4.3. Un- Register The Pairing
1. Press and hold the Pairing/Test button for 5 seconds
to enter un-register mode, 3 LED light together.
2. If user wants to un-register the 1st
press the Pairing/Test button within 2 seconds, the 1st
LED will be flashing (the other 2 LED light), means
user is now un-registering the 1st BELL PUSH, press
the Pairing/Test button until the 1st LED goes off,
beeps to confirm. The 1st remote is now un-registered.
3. If user wants to keep the 1st BELL PUSH but un-
register the 2nd or 3rd BELL PUSH, when the 1st LED
flashes, press the Pairing/Test button within 2 seconds,
the 2nd LED flashes (other 2 LED light), to select
which BELL PUSH to be un-registered.
Note :
1. To check whether the unit works normally, you can
press the
sound alarm and flash.
2. Don't unregister a BELLPUSH unless it is really
necessary.
(pairing/Test) button, the unit would
11
PAIRING
BELL PUSH,
Werbung
Fehlerbehebung
