Hardware Installation; Free-Standing Installation; Wall-Mounted Installation - ZyXEL G-4100 v2 Bedienungsanleitung

6 Hardware Installation

In general, the best location for the access point is at the center of your intended wireless coverage area. For
better performance, mount the G-4100 v2 high up in a spot free of obstructions.
Note: Do not block the ventilation holes.

6.1 Free-standing Installation

1 Use the included screw to connect the G-4100 v2's stand. Do not tighten the screw yet.
2 Twist the stand to the side and un the connection wires through the gap in the stand.
3 Twist the stand back to the vertical position and tighten the screw.

6.2 Wall-mounted Installation

1 Install the two included screws in the wall 80mm (3.15") apart. Do not screw the screws all the way into the
wall. Leave a small gap between the head of the screws and the wall.
ENGLISH
10