General; Safety Tips; Warranty - Becker Centronic SunWindControl SWC441 Bedienungsanleitung

The SWC 441 can be used to operate one or more sun protection systems and to set
threshold values for sun protection and wind control with the help of the setting
aid provided.
This device is excellent because it is so easy to operate.
Becker-Antriebe GmbH will be released from all warranty and product liability obli-
gations if the customer modifies the equipment without prior approval from
Becker-Antriebe GmbH or if the equipment is installed incorrectly and/or contrary
to the specified installation instructions, by the customer or a third party.
Any further processing must comply with all current statutory and official regula-
tions governing manufacture and advice to customers, especially the EMC regula-
tions.
This product is subject to technical developments and improvements. Please refer to
the current sales brochure for the precise product specifications.
Danger
Please keep the instructions in a safe place!
• Use in dry rooms only.
• Use unmodified Becker original parts only.
• Keep persons away from the system guide track.
• Keep children away from controls.
• Please comply with national stipulations.
• Dispose of used batteries properly. Replace batteries by an identical type
(LR 03; AAA) only.
• If the system is controlled using one or several transmitters, the system
guide track must be visible during operation.
• Please refer to the specifications given in the operating instructions for the
sun protection system

General

Warranty

Safety tips

12
Operating Instructions