ROBBE RAT Bedienungsanleitung Seite 16

21
ARF PNP
23
In the last step, mark the center of gravity on the underside of the wing and move the battery until
the center of gravity meets our specifications.
Function
Elevator
Rudder
Ailerons
Brake
Now look for a day with suitable weather conditions for the first flight. With the mentioned settings you will be spared bad surprises. We recommend, at least on the first flight, to make the start with a starting helper.
Enjoy your new model aircraft and „always happy landings!".
16
Instructions and User Manual
ARF
Glue the servo covers with UHU POR. So the covers
can be easily removed again later.
C O N T R O L T H R O W S
Normal Speed
+3 mm / -3 mm; 15% Expo
/
+10 mm / -8 mm; 25% Expo
+13mm, and ELEV -1mm
W I N G
ARF
PNP
22
Screw the fuselage and wing by the enclosed M4 screw.
ARF PNP
Due to the high propeller speed, only the propellers made of carbon by RASA are recommended by us
24
may be used. For other products, there is a risk of the propellers tearing off. Now look for a day with suita-
ble weather conditions for the first flight. With the mentioned settings you will be spared bad surprises.
We recommend, at least on the first flight, to make the start with a starting helper.
Thermal
E N D I N G
Landing