Operating The Semi-Rigid Ureteroscope - Stryker Endoscopy Semi-Rigid SRU-6X Bedienungs- Und Wartungshandbuch

WARNING Never reuse an instrument port seal valve. Instrument port
4. Connect irrigation tubing to the ureteroscope (if necessary). (See
Figure 3).
• Attach irrigation tubing to either of the working channels.
• If desired, attach a port seal valve to the other working channel
(channel not used for irrigation).
Figure 3: Attaching the irrigation tubing
Note Stryker couplers, light-fiber cables, light-fiber cable adapters, and
various Semi-Rigid Ureteroscope accessories are available for
purchase through Stryker Endoscopy. Refer to the individual product
manuals for further product information.
WARNING When several pieces of electrical medical equipment are
5. Connect the ureteroscope to a camera.
• Adjust coupler to achieve sharp and clear image.
• Pointing the ureteroscope towards a white 4x4 gauze, white balance
the camera.
Note Refer to camera user manual for operating instructions.
Operating the Semi-Rigid
Ureteroscope
WARNING To minimize the risk of patient infection, the Semi-Rigid
WARNING Before all surgical procedures and sterilization processes,
EN-7
seal valves are intended for single use only and will
compromise sterility if reused.
used together, leakage current may be additive. Lower leak-
age currents may be achieved by using only CF applied parts.
Ureteroscope must be cleaned and sterilized prior to the first
use and every subsequent use. See the "Cleaning and
Maintenance" section for details.
inspect the Semi-Rigid Ureteroscope for damage. Do not use
any damaged Ureteroscope in a surgical procedure.