Safety Labels; Identification Of The Machine; Identification Of Main Components - Texas XC160-102HC Bedienungsanleitung

1.3 Safety labels

See Fig 1
Your machine must be used with care. This is why
labels with illustrations have been placed on the
machine, to remind you of the main precautions to take
during use.
These labels are to be considered an integral part of the
machine.
Should a label come off or become illegible, contact
your dealer to replace it.
Their meaning is explained below.
Warning:
Read the instructions before operating
this machine.
Warning:
Disconnect the ignition key and read
the instructions before carrying out any
repair or maintenance work.
Danger!
Ejected objects:
Do not operate without the discharge
guard or grass-catcher in place
Danger!
Ejected objects:
Keep bystanders away
Danger!
Dismemberment:
Make sure that children stay clear of
the machine at all time when engine is
running
Danger!
Risk of injury:
Blades in movement, Do not put hands
or feet near. The blade will continue
turning for sometime after switching off
the engine or disabling the blade
control
Danger!
Risk of burns:
Wait for the engine to completely cool
down before making any adjustments
or servicing the engine itself
Danger!
Risk of overturning on steep gradients
Do not use the machine on lawns with gradients
of more than 15° (27%).
Do not use the machine on lawns with side
gradients above 10° (18%).
1.4 Regulations for towing
Accessories can be fitted to the rear hook of the
tractor. When using the towing kit, do not exceed the
recommended loads (200 kg) and follow the safety
instructions. See Fig. 2
2. Identification of the machine and components

2.1 Identification of the machine

See Fig. 3
The label located in the seat bracket has the essential
data of each machine:
1. Acoustic power level according to
directive 2000/14/CE
2. Weight in kg
3. Serial number
4. Year of manufacture
5. Cutting width and engine power
6. Engine speed in rpm (if indicated)
7. Conformity mark according to directive
2006/42/EC
8. Type of machine
9. Name and address of manufacturer

2.2 Identification of main components

See Fig. 4
The main components of the machine:
1. Grass-catcher
2. Grass unloading pipe
3. Driving seat
4. Steering wheel
5. Headlight switch
6. Blade engage switch
7. Engine switch
8. Retroversion tread board
9. Go ahead tread board
10. Cutting height adjust lever
11. Grass bag overturn lever
12. Engine throttle
13. Rear wheel
14. Cutting deck
15. Brake tread board
16. Park tread board
17. Front wheel
24