Wohler VIS 2000 Bedienungsanleitung Seite 26

7. System components
7.4.7 Viper Camera Holder (Order no. 8680 J)
7.4.8 Camera Spring Guide (Order no. 8633 J)
7.4.9 Special Cable (Order no. 9181 L)
0.8 m, for the connection of the Camera rod to the monitor.
7.4.10 Camera rod
Camera rod black, flexible, 6 mm Ø, 5 m long
Camera rod black, flexible, 6 mm Ø, 20 m long (Order no. 7818 J)
Camera rod black, flexible, 6 mm Ø, 30 m long (Order no. 7819 J)
Camera rod red, stable, 7 mm Ø, 5 m long
Camera rod red, stable, 7 mm Ø, 20 m long
26 Hotline: 0 29 53 / 73 211
Miniature camera head VIS 2000
The viper camera holder disposes of a
connection cable and a M 10 thread and
therefore can easily be installed to all
camera rods. The camera is in a protective
cage and faces down, so that incidental
daylight does not cause problems. Atta-
ched to rods both, horizontal and vertical
pipes can be examined.
For centering of the camera head in verti-
cal vents. A stainless steel spring prevents
a rotating and oscillating of the camera
head. The spring is adjustable on the
tubing size.
(Order no. 7821 J)
(Order no. 7829 J)
Fax: 0 29 53 / 73 250
(Order no. 7305 J)