Guide Conducts For The Inspection; Maintenance; Trouble Shooting - Wohler VIS 2000 Bedienungsanleitung

3. Guide conducts for the inspection

3. Guide conducts for the inspection
As all tubes and chimney sistems are different, the user has to decide about the
guide conducts in every single case. For the selection of the correct guide con-
duct it is important to consider that the guide conduct has to facilitate the intro-
duction and the extraction of the camera head, as well as an adequate guidance.
The danger of jamming or getting stuck in the tube has to be avoided.
Inspection of a tube
Ø 50 – 70 mm
Inspection of a tube
Ø 70 – 100 mm
Inspection of a tube
Ø 100 – 125 mmm
InInspection of a tube
Ø 150 mm or larger

4. Maintenance

Clean the lens only with a clean damp cloth but never with cleaning agent.

5. Trouble shooting

Error message displayed:
No camera
No image
Grass
20 Hotline: 0 29 53 / 73 211
Inspection without bends will be possible.
An inspection will be possible without prob-lems with
the lens protection or without it. In down pipes or for
the vertical inspection a guidance weight has to be
used.
spection with a roller guide. Centering stars can be
used in addition.
All components are adecuate.
Remedy:
Control the connection between camera and
monitor.
Charge the monitor battery.
Charge the monitor battery.
Miniature camera head VIS 2000
Fax: 0 29 53 / 73 250